A metal lathe is one of the most important tools required in a metal working shop. If you are a professional metal worker or simply a hobbyist, buying a good quality metal lathe is a good idea. But how do you use it? This article will tell you all about it.
Most metal lathes come with a 3 jaw chuck though a few of them have a 4 jaw chuck. The chuck rotates at variable speeds up to as much as 6500 rpm on machines. For starting, you will have to clamp the piece of metal to be turned in the chuck. As the metal lathe is a precision machine, you will have to cut the sizes according to the tolerance it has. Leaving the key in the chuck is a mistake you cannot make. Use the key only when you use it to tighten the part in the chuck.
Lathe Metal
Since using a metal lathe is not exactly a piece of cake, it would be a good idea to work with it for the first few times under the guidance of an experience metal master. This is also a power tool that can easily hurt you if you are not the least bit careful.
Working with metal is enjoyable only if you know how to. Wearing protective eye gear is extremely important when you are doing any kind of metal work because the fire splinters that get emanated may even blind you. Also, choose your metal working power tools with care and make sure you invest in high- quality products.
Tips to Use a Metal LatheSouthbend metal lathe assignment 1 of 2 (basic use) Video Clips. Duration : 9.42 Mins.Introduction to lathe table. VDO offers a range of materials and tools. Illustrates the safety and ease of the procedures for planning, turning and drilling. See also Part 1. Video used for introducing me to the middle school program in Vancouver technical metal lathe.
Tags: metalwork, safety, machinist, lathe, WCB, Vantech, metalshop, standard, modern, facing, drilling, turning, metal
No comments:
Post a Comment